Friends, we all need to use all the Best Methods to Clean the Carpet. For this, we are going to tell you about the best method, so that you can easily do carpet cleaning for your home or business. For this you can choose a company, or you can also use it yourself.
In the 1970s, there were not many methods used to clean carpets, at which time shampoo carpet cleaning was popular until the introduction of encapsulation technology. by which the carpet was cleaned. Carpet shampooing can be used to clean heavily soiled carpet. Carpets take a long time to dry when used with this method, and the carpet becomes sticky. This method is used the least.
Usually, hot water is most commonly used to clean carpets. Known as steam carpet cleaning, hot water removal cleaning uses high-pressure hot water to dissolve dirt off the carpet fibers. Due to which the carpet gets cleaned quickly. This involves using a cleaning agent, moving the carpet with a brush, and then rinsing. After washing with warm water, the carpet is left in an air-conditioned temperature to dry. If you clean the carpet with hot water, it takes about 2 hours to clean an office with an average size of 3000 square feet of carpet. And it takes at least 4 hours to dry. Most cleaning companies recommend cleaning the carpet in the late afternoon, leaving the carpet to dry overnight.
Encapsulation is also a better method of cleaning carpets. In this foam encapsulation synthetic detergent is used as a base. Which on drying will crystallize in the form of powder. When it is applied on the carpet. So the cleaning foam dries up and finally, the foam comes out after cleaning. The loose dirt particles in the carpet fiber will be absorbed into the powder, which also removes the dust layer in it. Foam encapsulation cleaning technology has overtaken carpet shampooing, which is the most commonly used method today. Because it uses less water. And shampooing carpets also takes more water and time to dry. Foam encapsulation is preferred by those who advocate using eco-friendly products.
Bonnet carpet cleaning produces good surface cleaning results. The process primarily uses a heavy duty motorized machine with a spinning pad. This involves cleaning the top part of the fiber, which is used to absorb dirt from the surface of the carpet. It is mostly used by cleaning companies. The bonneting process is most popular for cleaning office and hotel carpets, as it can provide a quick solution for cleaning carpets in a public area with heavy traffic. It takes the least amount of time to clean. Hotel cleaning done through this allows the carpet to dry quickly to avoid inconvenience to hotel guests.
Because in bonneting method the carpet is not cleaned deeply. Hence it dries up quickly. The dirt under the carpet will return to the surface within a short period of time, making the carpet dirty again quickly.
Dry Carpet Cleaning
Dry carpet cleaning is also known as compound cleaning. It is one of the latest cleaning technology found in the market and is used by most of the leading carpet manufacturers to increasing popularity. Because it does not require drying time. Since dry carpet cleaning technology was invented in the 1980s, cleaning compound powders have been developed for it.
The other Cleaning Technology it uses is considered relatively new compared to other traditional wet carpet cleaning methods. This technique cleans the compound or powder on the underside of the carpet and allows the compound to settle inside. Due to which the carpet is completely cleaned.