Very few people know about how to use Bissell Carpet Cleaner. In today’s post, we will tell you how you can use it to clean your carpet.

Proper use of Bissell Carpet Cleaner removes carpet scum quickly and easily. Due to this it does not deteriorate quickly and provides you good and long service. For this, we are telling you the step by step process below, so that you can easily clean your carpet with it.

Process to Clean carpet with Bissell Carpet Cleaner Step By Step

  1. First, look at the heavily soiled areas on the carpet. Then, move the machine over your carpet where the stain is. You remove or refill the water tank occasionally. Keep your carpet looking old by using carpet cleaner several times a year.
  2. When you clean the carpet under the furniture, take it off the carpet and out of the room. Give yourself enough room to maneuver and reach the stain in tight spaces. This makes the machine work smoothly. Move the carpet cleaner around carefully to avoid leaving marks or scratches on the carpet
  3. After this, vacuum the carpet thoroughly to remove the dirt from the carpet. Clean the carpet with a regular carpet vacuum. Use a bissell carpet cleaner to remove as much of the dirt as possible. Use a conventional vacuum with a beater bar to remove any other debris or dry soil along with it. Y
  4. If you want to remove any kind of smell from it, then you can also use carpet shampoo (optional) for this. Use this shampoo on the stained areas. You can find bottles of carpet shampoo at any general store. Target the areas that are prone to getting dirty with a lot of foot traffic then swish the Bissell Carpet Cleaner over it after applying shampoo on it. In this way you can easily clean your carpet.

Remember shampoo is sprayed directly on the carpet or blotted with a wet paper towel. After this, the work of running the carpet cleaner starts. If it is wet sometimes it may take time to dry like this. Generally it takes 3 to 4 hours to dry. Usually the soap should be allowed to soak in for about 3 minutes. Sometimes just using a carpet cleaner isn’t enough to clean these areas, you can use it again after a week if it gets dirty.

Installation of Bissell Carpet Cleaner

Fill the water tank with hot water to set up the Bissell Carpet Cleaner. Detach the tank at the front end of the carpet cleaner. After that the hot water is flowing from the sink tap, then put the spout of the tank under it. In this you have been given a mark to fill the water, so that you can see how much you have to fill it. Add carpet cleaning formula to its water tank. You can use it to work with your carpet cleaner. Keep in mind that pour the formula directly into the hot water until it reaches that line.

After this you have to set the cleaning dial in the cleaner. Find the dial on the front of the cleaner, next to the tank, the dial here will have the settings for light, normal, and heavy cleaning. If the carpeting is more messy then you have to choose heavy and if it is less messy then you can opt for normal. Depending on how messy the carpet is, choose the right setting and adjust it as you go.

In this way you can use Bissell carpet cleaner.

-Thanks